Ground Power Series>1:72 die-cast display model>KV>HG3002
KV-2 Heavy Tank
General Background
The Russian KV-2 heavy tank was famous for its enormous size and the gigantic 152mm gun. It was named after the Soviet defense commissar and politician Kliment Voroshilov. The KV-2, designed as a slow-moving bunker-buster, was built using the same hull and chassis as the KV-1. It was reported that the KV-2 could withstand over forty enemy hits and none penetrated its armor before the use of Flak 18s and 36s by the Germans. However, the KV-2 was a victim of its own design because of its large turret which stood out as an east target for enemy firepower. It was also tremendously heavy and had a high rate of mechanical failure.
A total of 334 KV-2s was produced during the period from 1940 to October 1941. The Russian words “For Stalin” was inscribed on this high profile turret.
A total of 334 KV-2s was produced during the period from 1940 to October 1941. The Russian words “For Stalin” was inscribed on this high profile turret.
A total of 334 KV-2s was produced during the period from 1940 to October 1941. The Russian words “For Stalin” was inscribed on this high profile turret.
Specifications :
Crew : | 6 |
Weight : | 52 tonnes |
Length : | 23.3 ft – 7.1 m |
Width : | 10.9 ft – 3.32 m |
Height : | 10.6 ft – 3.23 m |
Engine : | Diesel V-2K 600 hp |
Maximum speed : | 21 mph – 34km/h |
Maximum range : | 155 miles - 250 km |
Armor : | Hull front / 2.95 in – 75 mm |
Hull side/ 2.95 in – 75 mm | |
Hull rear/ 2.36 to 2.76 in – 60 to 70 mm | |
Turret/ 2.95 in – 75 mm | |
Armament: | 1 x 152 mm M-10 model 1938/1940 Howitzer |
3 x 7.62 mm DT machine guns | |
Production total: | Approximately 334 |